当前位置:88必发官网登录 > 资讯中心 > 行业动态
行业动态
  • 选购搬运车时需要了解哪些技术参数?
  • 本站编辑:xghl发布日期:2018-07-24 00:00 浏览次数:
敞篷式电瓶车 09
 
搬运车是搬运货物的一种常见物流搬运设备,常见的有手动液压搬运车、半电动搬运车、全电动搬运车、防爆搬运车等等,它不仅提高劳动工效,还实现了安全搬移。选购搬运车时需要了解的一些常见的技术参数如下:
The carrier is a common material handling equipment for transporting goods. There are manual hydraulic truck, semi electric carrying car, all electric carrying car, explosion-proof truck and so on. It not only improves labor efficiency, but also realizes safe moving. Some common technical parameters that need to be learned when choosing a truck are as follows:
1、搬运车外形尺寸
1. The shape size of the truck
搬运车外形尺寸是指车的总长、总宽和总高,为了使搬运车具有良好的机动性能,其外形尺寸应尽量减小。
The shape dimension of the moving vehicle is the total length, width and height of the vehicle. In order to make the moving vehicle have good maneuverability, the shape dimension should be reduced as far as possible.
2、空车重量
2. The weight of the empty car
空车重量又称自重,是指完全装备好的搬运车质量,以kg计。搬运车自重表示搬运车质量的技术指标。
Empty truck weight, also known as self-weight, refers to the quality of fully equipped haulers, measured in kg. The weight of the hauler represents the technical index of the quality of the hauler.
3、载重量(额定起重量)
3. Load (rated weight)
载重量是指搬运车装运时额定载物重量,即货物中心至货叉垂直段前臂的距离不大于载荷中心距时,允许起升货物的重量,以t表示。
Carrying weight is the rated load weight of the carrier, that is, when the distance between the cargo center and the forearm in the vertical section is not greater than the distance from the load center, the weight of the lifting goods is allowed to be expressed in t.
4、总重量
4. Total weight
总重量是指空车重量与载重量之和。
The total weight is the sum of the weight of the empty car and the load.
5、载荷中心距
5. The center distance of the load
载荷中心距时指在货叉上放置标准的货物时,其货物重心线至货叉垂直段前臂的水平距离。
Load center distance refers to the horizontal distance from the center of gravity of the goods to the forearm of the vertical section of the fork when standard goods are placed on the fork.
6、起升高度
6. Lift height
在平坦坚实的地面上,搬运车满载,门架垂直,货物至最高处,货叉水平段的上表面至地面的垂直距离成为搬运车的起升高度。
On the flat and solid ground, the truck is loaded with full load, the door frame is vertical, the goods reach the highest place, the vertical distance from the upper surface of the fork level section to the ground becomes the lifting height of the truck.
7、爬坡度
7. Climbing slope
搬运车的爬坡度是指搬运车空载和满载时,在正常的路面情况下,以低速挡等速运行时所能爬越的坡度,通常以度或百分数表示。
The climbing gradient of a van is a gradient that can be climbed at the same speed as a low speed gear in normal road conditions, usually expressed as a degree or a percentage in normal conditions.
博聚网